How does Motorcycle Carburetors Work on Engine

Motorcycle carburetor work by mixing the right amount of gasoline with air so that the engine runs properly. Most carburetors used on motorcycles also use a throttle plate to regulate the airflow inside the motorcycle's engine.
It should be noted that the number of spark plugs a motorcycle has is determined by how many cylinders are on the bike. Most dirt bikes have one cylinder while most street bikes have two or four.
In summary, then, here's how it all works:
Air flows into the top of the carburetor from the car's air intake.
When the engine is first started, the choke (blue) can be set so it almost blocks the top of the pipe to reduce the amount of air coming in (increasing the fuel content of the mixture entering the cylinders).
In the center of the tube, the air is forced through a narrow kink called a venturi. This makes it speed up and causes its pressure to drop.
The drop in air pressure creates suction on the fuel pipe (right), drawing in fuel (orange).
The throttle (green) is a valve that swivels to open or close the pipe. When the throttle is open, more air and fuel flows to the cylinders so the engine produces more power and the car goes faster.
The mixture of air and fuel flows down into the cylinders.
Fuel (orange) is supplied from a mini-fuel tank called the float-feed chamber.
As the fuel level falls, a float in the chamber falls and opens a valve at the top.
When the valve opens, more fuel flows in to replenish the chamber from the main gas tank. This makes the float rise and close the valve again.